Model 5942 and 5944 MicroTester Precision Instruments for Small-Scale Testing
The Model 5942 and 5944 MicroTesters offers solutions for industries faced with the challenges of testing small assemblies or miniature specimens by combining an ultra-high precision drive system with high-accuracy load measurement. The MicroTester has the ability to perform tension, compression, and low-cycle fatigue tests with a load force range of <2 mN up to 2 kN. Micro-position displacement control is obtained using preloaded ballscrews drive system that is equipped with both a rotary encoder and a 94 nm resolution encoder. The end result is a mechanical testing system that provides unparalleled control performance for short-displacement tests.
General Purpose Research
The Model 5942 and 5944 MicroTesters provide researchers with a precision instrument capable of performing numerous mechanical tests. For applications requiring precision control, high-load frame stiffness, high-drive system stiffness, and sensitive load measurement, the MicroTester provides a superior platform for generating quality, reliable force-displacement data. Combined with Bluehill® Software, the possibilities are limitless.
The increasing use of implantable devices, engineered tissues, and small-scale devices, have generated a need for an entirely new range of small-scale testing. This typically requires the flexibility for testing with a variety of fixturing, specialty grips, and saline baths. The Model 5944 MicroTester can be used to test everything from sutures to tissue to stents and implantable devices.
The micro bend fixture is designed for 3-point flexure testing of miniature components and specimens. The fixture has a fixed 1 mm (0.04 in) span.
- 220.8 KB
Catalog Number 2711-001/ 006 Rated capacity 5 N (0.5 kgf, 1.1 lbf) For single fiber specimens and very fine wire.
- 337.1 KB
The micro bend fixture is designed for 3-point flexure testing of miniature components and specimens, where the specimen is supported on two lower anvils and load is applied by a single upper anvil at the center of the specimen.
- 241.1 KB
Webinar on Bluehill Software presented by Jim Ritchey and Frank Lio on July 15, 2004, October 27, 2004 and December 8, 2004.
- 11.1 KB
Ultra High Precision Testing Systems. Mechanical Testing for Microelectronics R&D, production and other varieties of high accuracy, small scale testing.
- 0.9 MB
The 2810-412 miniature 3-point bend fixture is designed for Mode II fracture toughness testing. The fixture fully complies with the requirements of SEMI standard G69-0996 ‘Test method for measurement of the adhesive strength between lead frames and molding compounds for semiconductor packages’.
- 0.5 MB
Bluehill Universal Software is built from the ground-up for touch interaction and an intuitive user experience. Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting: and Instron Connect – a new feature that provides a direct communication link to Service. Users of previous versions of software such as Bluehill 2 and Bluehill 3 can easily upgrade to the newest version of Bluehill.
- 1.4 MB