| 31/01/2012 |
3250 Series Hydraulic Power Units for servohydraulic testing systems
| Products |
| 31/01/2012 |
The Biopuls submersible pneumatic versa grips provide an easy and
efficient method for gripping test specimens, ranging
from thin film polymers to biological tissues, in a fluid
bath for tension and torsion mechanical testing.
| Products |
| 31/01/2012 |
Compliant with ASTM E 1012 standards, the New AlignPRO™ system is designed to assist you in the measurement, adjustment and verification of load string alignment.
| Products |
| 27/01/2012 |
Proper preparation of the specimen is a critical process for
accurate material characterization. An appropriate preparation
of the specimen, as well as an adequate notching procedure
affect the final test results, generating reliable outcomes in the
finish product performances. This is accomplished by several
specimen preparation techniques, making them particularly
suitable to select the most appropriate material and failure
results analysis. According to the requirements of the main
international standards, Instron® offers an extensive range of
notching, milling, and punching machines designed to prepare
specimens from thin to thick samples, as well as from soft to
hard and reinforced plastic materials.
| Products |
| 27/01/2012 |
Polymer melts exhibit a complex f ow behavior and show a different
fluidity based on the applied pressure. A deeper plastics material characterization can be achieved if more than one condition is used within a single experiment, following a multiple weight test procedure dedicated to advanced quality control and research purposes.
| Products |
| 27/01/2012 |
Thermoplastic materials are processed as fluids under the effect
of temperature and pressure. The ability of melted materials to flow under pressure at set temperatures has a fundamental importance in polymer science and technology. The Instron line of CEAST Melt Flow Testers have been specifically designed for the easy and accurate measuring of the flow properties of plastics according to the related ISO and ASTM international standards.
| Products |
| 27/01/2012 |
Featuring a dual test space and long test stroke HDX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.
| Products |
| 5/01/2012 |
Guide to the various components of a high-temperature tensile testing system--furnaces, grips, pull rods, and extensometry. Includes an important system configuration tool.
| Products |
| 21/12/2011 |
Pneumatic action grips allows rapid, easy loading of specimens from delicate films to polymers
and woven fabrics. This provides a very simple and efficient method for holding flat test
specimens in applications where you can easily insert the specimen and quickly apply a
clamping force. Both jaw faces automatically adjust to different specimen thickness to ensure
that the line of tensile force remains concentric with the grip body.
They can be equipped with a selection of interchangeable grip jaw faces in various sizes and
choice of surfaces including smooth ground, rubber-coated and serrated. Line contact and
special coated faces are also available. Grip control may incorporate a footswitch allowing
hands-free operation for speed, simplicity-of-use and accuracy of alignment within the grips. In
addition, grip opening and closing can be controlled from the testing machine, providing features
such as automatic pretension and grip release on specimen break.
Catalog number 2712-019
Rated capacity: 250 N (25 kgf, 50 lbf)
| Products |
| 6/12/2011 |
Screw side-action grips provide a very simple and efficient method for holding test specimens in a wide range of applications. The dual - acting design of 2710-100 series grips means that jaw faces can be adjusted to accommodate different specimen thicknesses. This ensures that the line of tensile force remains concentric with the grip body. They can be equipped with a selection of terchangeable grip jaw faces in various sizes and choice of surfaces including smooth ground, rubber-coated and serrated. Line contact and special coated faces are also available.
Jaw faces can be changed single-handedly in seconds without the use of tools or pins.
| Products |